तेजवान क्यों
What you are actually buying
Every geyser looks much the same from the outside. The differences are all
inside, and they are the reason one lasts three years and another lasts ten. Here is
where we spend the money, and where we do not.
The tank, and what it is lined with
The tank is what ends a geyser's life. Our ELITE uses a glass-lined tank rather than
bare steel, because the lining is what slows scale from taking hold. In a hard-water
area that is the difference between descaling twice a season and once every two or
three years.
Insulation you cannot see on a shelf
High-density PUF foam, because insulation decides your monthly bill more than anything
else. Thin insulation is the easiest place to save money in manufacturing and the
hardest for a customer to check in a shop.
Two safety devices, not one
A capillary thermostat manages normal temperature, and a completely separate thermal
cut-out trips if the thermostat ever fails. One failure should never become a hazard.
This is common across the whole range — we did not hold basic safety back for the
premium model.
Rated for the pressure that actually exists
Supply pressure climbs with every floor, and a booster pump raises it further. The
ELITE is rated to 8 bar and carries an overpressure safety valve for exactly this
situation.