The everyday workhorse
TEJVAAN AQUA is the model most homes actually need: a properly insulated 4 bar tank with the same safety fittings as our premium series, at the price point where most geysers are bought. Available in vertical and horizontal mounting.
Capillary thermostat with an independent thermal cut-out, and a pressure release valve. We did not hold basic safety back for the premium model — those are common across the range. What the ELITE adds is the glass lining, the anode rod and the 8 bar tank.
Where a false ceiling or a narrow bathroom rules out a vertical unit, the horizontal variants fit the same capacities without compromising the tank.
The layer that decides your monthly bill. Water stays hot overnight, so the element cycles less often.
Accessible element and fittings, so routine descaling is a normal service job rather than an ordeal. Note this model is not fitted with an anode rod — if your water is hard, read the comparison before deciding.
Tap any part to see what it does and why it matters. Most geyser failures trace back to one of these six components.
Powder-coated steel outer shell. Its job is to protect the insulation and survive a decade in a damp bathroom without rusting through.
The layer that decides your electricity bill. Thicker, denser foam holds heat overnight, so the element switches on less often. Thin insulation is the most common place a cheap geyser saves money.
Steel tank rated to 4 bar, suitable for normal domestic supply. In hard-water areas expect descaling once or twice a season. If your building uses a pressure pump, or your water is hard, the glass-lined ELITE tank is the one worth looking at.
Copper element. Scale from hard water is what kills elements — it coats the surface until heat cannot escape and the element cooks itself, which is why descaling is maintenance rather than a fault.
This model is not fitted with an anode rod; the ELITE is. If your water is hard, that difference matters more than anything else on this page.
Two independent devices, deliberately. The thermostat manages normal temperature; the cut-out is a separate safety that trips if the first one ever fails. One failure should never become a hazard.
A geyser's price is paid once. Its electricity is paid every month for a decade. This works out roughly what yours would add to the bill, using your own tariff.
Indicative only. Real consumption depends on inlet water temperature, how hard your water is, thermostat setting and usage pattern.
Assumes heating from about 20 °C to 60 °C. Insulation quality changes this materially — a well-insulated tank reheats less.
| SKU | Capacity | Mounting | Pressure | Warranty | Tank warranty | MRP |
|---|---|---|---|---|---|---|
TJV-AQUA-15H |
15L | Horizontal | 4 bar | 2 yr | 2 yr | ₹8,000 |
TJV-AQUA-25H |
25L | Horizontal | 4 bar | 2 yr | 2 yr | ₹8,500 |
TJV-AQUA-15V |
15L | Vertical | 4 bar | 2 yr | 2 yr | ₹5,465 |
TJV-AQUA-25V |
25L | Vertical | 4 bar | 2 yr | 2 yr | ₹5,850 |
| Supply | 230 V AC, 50 Hz, single phase |
| Insulation | High-density PUF |
| Inner tank | Steel |
| Heating element | Copper |
| Safety | Capillary thermostat with independent thermal cut-out, pressure release valve |
| Anode rod | Not fitted on this model |
| Mounting | Wall mounted, brackets supplied |
| Country of origin | India |
Our geyser service network covers seven states in North India. Worth knowing now rather than after a fault.
Photograph your invoice once. We verify it within 48 hours and email you a warranty certificate as a PDF. After that, checking your cover needs nothing more than your mobile number.
Leave your number and what you need. We call back the same working day.
We use a couple of cookies to keep forms working, and optional ones to understand how the site is used. Nothing loads until you choose. Read our Privacy.
